shanghai Guangsu Manufacture Co.ltd
Honesty, quality first, service first!
Add to Cart
Chair Plastic Injection Moulding Machine
| GS808 | ||||||
| A | B | C | D | |||
INJECTION UNIT | Screw Diameter | mm | 90 | 100 | 110 | 120 |
| Screw L/D Ratio | L/D | 24.4 | 22 | 20 | 18.3 | |
| Shot size(Theoretical) | cm3 | 3181 | 3927 | 4752 | 5655 | |
| PS) Injection Weight | g | 2895 | 3574 | 4324 | 5146 | |
| Injection Pressure | Mpa | 211 | 171 | 141 | 119 | |
| PS Injection Rate | g/s | 463 | 572 | 692 | 823 | |
| PS Plasticizing capacity | g/s | 101 | 129 | 162 | 199 | |
| Screw stroke | mm | 500 | ||||
| Screw Speed | rpm | 0-110 | ||||
CLAMPING UNIT | Clamp Tonnage | KN | 8080 | |||
| Toggle stroke | mm | 1040 | ||||
| Space Between Tie Bars | mm | 1000*1000 | ||||
| Max.Mold Height | mm | 1000 | ||||
| Min.Mold height | mm | 400 | ||||
| Ejector stroke | mm | 280 | ||||
| Ejector tonnage | KN | 186 | ||||
| Ejctor Numbre | peicc | 21 | ||||
OTHERS | Max.Pump Pressure | Mpa | 16 | |||
| Pump Motor Power | KW | 44+44 | ||||
| Heater Power | KW | 61.3 | ||||
| PS Hopper Capacity | Kg | 100 | ||||
| Oil Tank Capacity | L | 870 | ||||
| Machine Dimension(L*W*H) | m | 9*2.56*3.5 | ||||
| Machine Weight | t | 33 | ||||
Advantages:
Clamping Unit:
Template design mold space and long stroke
Big column space and open stoke
Applicable for Wide range of different mould sizes
Control System:
All-digital control system
Multiple CPU processing division
Multi-functional automatic fault detection&alarm system
Remote control LCD, easy operation Human-Machine Interaction Techniques.
- Injection part:
1.The excellent chrome , molybdenum and aluminum alloy screw and barrel have undergone the nitrilizing process, applicable to various plastic materials.
2.The injection cylinder(258T advanced) is parallel or balance for both sides of the barrel, so as to ensure the non-deviation of the nozzle, good sealing and non-leadage. It is equipped with double guide pillar supporting system which can inject under multifarious pressure at various speeds. It also uses one-stop hydraulic pre-injection device.
Hydraulic part:
It adopts the imported top quality hydraulic components, proportional control for pressure and flow.
FAQ:
1) How can I place order?
A: You can contact us by email about your order details, or place order on line.
2) How can I pay you?
A: After you confirm our PI, we will request you to pay. T/T (HSBC bank) and Paypal, Western Union are the most usual ways we are using.
3) What’s the order procedure?
A: First we discuss order details, production details by email or TM. Then we issue you an PI for your confirmation. You will be requested to do pr -epaid full payment or deposit before we go into production. After we get the deposit, we start to process the order. We usually need 7-15days if we don’t have the items in stock. Before production has been finished, we will contact you for shipment details, and the balance payment. After payment has been settled, we start to prepare the shipment for you.
4)How do you take care when your clients received defective products?
A: replacement. If there are some defective items, we usually credit to our customer or replace in next shipment.
5)How do you check all the goods in the production line?
A: We have spot inspection and finished product inspection. We check the goods when they go into next step production procedure.
