shanghai Guangsu Manufacture Co.ltd
Honesty, quality first, service first!
Add to Cart
Table Electric Injection Molding Machine 160T
|
|
| GS168V | |||
| A | B | C | |||
|
| Screw Diameter | mm | 40 | 45 | 50 |
| Screw L/D Ratio | L/D | 22.5 | 20 | 18 | |
| Shot size(Theoretical) | cm3 | 253 | 320 | 395 | |
| PS) Injection Weight | g | 230 | 291 | 359 | |
| PS Injection Rate | g/s | 100 | 126 | 156 | |
| PS Plasticizing capacity | g/s | 13.9 | 18 | 21.6 | |
| Injection Pressure | Mpa | 240 | 190 | 154 | |
| Screw Speed | Rpm | 0-195 | |||
|
| Clamp Tonnage | KN | 1600 | ||
| Toggle stroke | mm | 430 | |||
| Space Between Tie Bars | mm | 470*470 | |||
| Max.Mold Height | mm | 520 | |||
| Min.Mold height | mm | 180 | |||
| Ejector stroke | mm | 140 | |||
| Ejector tonnage | KN | 33 | |||
| Ejector Number | piece | 5 | |||
|
| Max.Pump Pressure | Mpa | 17.5 | ||
| pump motor power | KW | 15 | |||
| Heater Power | KW | 9.75 | |||
| Machine Dimension(L*W*H) | m | 4.9*1.29*1.96 | |||
| Machine Weight | t | 5.3 | |||
| PS Hopper Capacity | Kg | 25 | |||
| Oil Tank Capacity | L | 350 | |||
The GS-V plastic injection machine with variable pump series shows its excellent performance as below:
1. Energy saving 30～50%;
2. Quick response of system, short shaping period;
3. The oil temperature of system reduces greatly the produced heat;
4.Reduce the mold opening/closing impact, extending the service life of machine and mold;
5.Extend the service life of oil circuit system, reducing maintenance times, and saving large amount of maintenance cost;
6. High accuracy demand on hydraulic oil; and high accuracy return filter is provided.
Machine FAQ
1. The machine is in running condition, and can make products?
Sure, machine must be in running condition, and take machines back, can make goods directlry.
2. Is there any warranty?
Of course, within three months, machine is with problem. offer free components.
3. Is there any oversea service?
If keep our engineers safety abroad, engineer will go oversea to help clients deal with problems.
4. Don't know how to set the production parameter of the controller?
Will take video to show how to do it.
5. How to confirm the machine auxilaries?
We'lll advise every auxilary machine capacity based on machine capacity and the environment of clients' country
6. Other detail problem with machine and production.
Let's discuss further.
