shanghai Guangsu Manufacture Co.ltd
Honesty, quality first, service first!
Add to Cart
Table Disposible Plastic Cup Molding Machine 200T
|
|
| GS168V | |||
| A | B | C | |||
|
| Screw Diameter | mm | 40 | 45 | 50 |
| Screw L/D Ratio | L/D | 22.5 | 20 | 18 | |
| Shot size(Theoretical) | cm3 | 253 | 320 | 395 | |
| PS) Injection Weight | g | 230 | 291 | 359 | |
| PS Injection Rate | g/s | 100 | 126 | 156 | |
| PS Plasticizing capacity | g/s | 13.9 | 18 | 21.6 | |
| Injection Pressure | Mpa | 240 | 190 | 154 | |
| Screw Speed | Rpm | 0-195 | |||
|
| Clamp Tonnage | KN | 1600 | ||
| Toggle stroke | mm | 430 | |||
| Space Between Tie Bars | mm | 470*470 | |||
| Max.Mold Height | mm | 520 | |||
| Min.Mold height | mm | 180 | |||
| Ejector stroke | mm | 140 | |||
| Ejector tonnage | KN | 33 | |||
| Ejector Number | piece | 5 | |||
|
| Max.Pump Pressure | Mpa | 17.5 | ||
| pump motor power | KW | 15 | |||
| Heater Power | KW | 9.75 | |||
| Machine Dimension(L*W*H) | m | 4.9*1.29*1.96 | |||
| Machine Weight | t | 5.3 | |||
| PS Hopper Capacity | Kg | 25 | |||
| Oil Tank Capacity | L | 350 | |||
Machine Features:
Injection unit:
1) Four injection pressures and speeds with three additional
pressures and speeds
2) Suck back function
3) Cold start protection
4) Pre-suck back function
5) Linear displacement transducer accurately monitor injection
position, providing optimum. injection accuracy and control
6) Temperature control
7) Heating Status indication
Clamping unit:
1) Three clamp close and open pressures and speeds
2) Mold protection function
3) Hydraulic ejector stroke controlled by transducer
4) Automatic hydraulic die-height adjustment driven by planetary
gears system
5) Adjustable support under moving platen
6) Automatic high pressure toggle lubrication with low oil level alarm
7) Mechanical, electrical and hydraulic safety interlock devices
8) Linear displacement transducer controls clamping position
Hydraulic System:
1.) The double proportional compound valve control system pressure & flow, highly sensitive & stable
2.) Imported high quality Pump, low in noise, long in lifespan & stable in performance
3.) World-famous servo hydraulic system optional, better performance in lower noise & energy saving
4.) The precise feedback control of servo system to the pressure & flow, with higher sensitivity & more accurate repeatability precision
5.) High performance hydraulic valve, less failure, fast switch, convenient maintenance
6.) Low pressure mold protect system, which is more suitable for the precise mould
7.) Greese & lubrication oil in dependent lubrication system can lubricate everywhere in the best situation
Electrical System:
1.) Control by double CPU, the system HMI use X86 300MHz technical grade display. The system employees a RISC 140MHz microprofessor, with high speed, noise-immunity, fan-less and lower power consumption, independent control structure improve the stablity of control
2.) 8.4" display screen with resolution 800*600, user friendly screen & optional choose of language
3.) Equiped with USB(2.0) port & ethernet(100-base T) ports
4.) 32 Points input & output, entendable and trouble spot can be replaced easily
5.) Linder transducer's resolution is 1/65535, more precise in control
6.) 120 technological parameters access can be stored & uploaded with an ordinary USB drives
7.) Injection End and temperature tracking is curve display, dynamic recorder parameter is modified, dynamic warningis exhibited, all these make the operation more convenient.
