shanghai Guangsu Manufacture Co.ltd
Honesty, quality first, service first!
Add to Cart
Horizontal Cutlery Plastic Injection Moulding Machine
Specification:
| GS208V | ||||||
| A | B | C | ||||
| INJECTION UNIT | Screw Diameter | mm | 45 | 50 | 55 | |
| Screw L/D Ratio | L/D | 22.2 | 20 | 18.2 | ||
| Shot Size(Theoretical) | cm3 | 390 | 481 | 582 | ||
| Injection Weight | g | 355 | 438 | 530 | ||
| Injection Rate | g/s | 123 | 152 | 184 | ||
| Plasticizing Capacity | g/s | 21 | 29 | 37 | ||
| Injection Pressure | Mpa | 190 | 154 | 127 | ||
| Screw Speed | rpm | 0-150 | ||||
| CLAMPING UNIT | Clamp Tonnage | KN | 2080 | |||
| Toggle Stroke | mm | 490 | ||||
| Space Between Tie Bars | mm | 530*530 | ||||
| Max.Mould Height | mm | 550 | ||||
| Min.Mould Height | mm | 150 | ||||
| Ejector Stroke | mm | 140 | ||||
| Ejector Tonnage | KN | 62 | ||||
| Ejector Number | piece | 9 | ||||
| OTHERS | Max.Pump Pressure | Mpa | 16 | |||
| Pump motor Power | KW | 18.7 | ||||
| Heater Power | KW | 14.5 | ||||
| Machine Dimension(L*W*H) | m | 5.41*1.59*2.03 | ||||
| Machine Weight | t | 6.9 | ||||
| Hopper Capacity | Kg | 50 | ||||
| Oil Tank Capacity | L | 220 | ||||
Horizontal Cutlery Plastic Injection Moulding Machine
Our machine equipped high performance servo variable speed motive power control system, leading the energy-saving tend, provide the best resolution to meet various requirement. The whole machine run in quick and smooth and stable with high production efficiency. Uses high performance rexroth hydraulic elements, guarantee quick,smooth,
stable mold clamping with low noise, shorten mold period, promote production efficiency. Because no flux heating in motive power, low oil temperature, can reduce cooling water for hydraulic oil even without cooling water, save the investment of cooling water facility and water resource also. Low noise running, low energy consumption.
FAQ:
1) How can I place order?
A: You can contact us by email about your order details, or place order on line.
2) How can I pay you?
A: After you confirm our PI, we will request you to pay. T/T (HSBC bank) and Paypal, Western Union are the most usual ways we are using.
3) What’s the order procedure?
A: First we discuss order details, production details by email or TM. Then we issue you an PI for your confirmation. You will be requested to do pr -epaid full payment or deposit before we go into production. After we get the deposit, we start to process the order. We usually need 7-15days if we don’t have the items in stock. Before production has been finished, we will contact you for shipment details, and the balance payment. After payment has been settled, we start to prepare the shipment for you.
4)How do you take care when your clients received defective products?
A: replacement. If there are some defective items, we usually credit to our customer or replace in next shipment.
5)How do you check all the goods in the production line?
A: We have spot inspection and finished product inspection. We check the goods when they go into next step production procedure.
